4" Submersible Pumps

FPS 4400 Sandhandler 50 Hz

Standard 4" FPS4400

Features:

• 5 performance ranges: 1, 1.5, 2, 3 & 4 M3/H
• Ceramic shaft sleeve and rubber discharge bearing protect shaft and eliminate sand wear
• An intermediate bearing provides improved shaft stability in all units that are greater than or equal to 1.5 kw, or longer than 24" (610mm) in length
• Thermoplastic impellers and stages for maximum efficiency
• Thermoplastic and stainless steel models include built-in Flomatic check valve
• Urethane Eye and Hub seals are remarkable resistant to abrasives, allowing sand and other abrasives to pass through each stage without wear or damage
• Powered by Franklin Electric's corrosion-resistant 4" submersible motor
• Maximum water temperature 50°C (120°F)
• Robust discharge head design with 1 - 1/4" (32mm) BSPP Discharge threads

The standard FPS 4400 submersible pump features unique hydraulics that improves efficiency and minimize wear when pumping abrasives (Sand). All FPS4400 pumps are unconditionally guaranteed against sand locking in abrasive well conditions for one full year. Discharge and motor brackets are available in thermoplastic or stainless Steel.

High Capacity 4" FPS4400

Features:

• 4 performance ranges: 6, 9, 12 & 16 M3/H
• Stainless Steel discharge head and motor bracket
• High flow impellers and stages are glass-filled Noryl for maximum efficiency
• Ceramic shaft sleeve and rubber discharge bearing eliminates sand wear
• Intermediate bearing for increased shaft stability
• Floating eye and hub seals improve performance and efficiency
• Stainless steel hex pump shaft, shell and shaft coupling
• High capacity upthrust assembly for protection during start-up and operation (9, 12 & 16 M3/H models)
• Powered by Franklin Electric's corrosion-resistant 4 inch submersible motor
• 2" (50mm) BSPP discharge threads
• Supplied with external check valve

Engineered for commercial, irrigation and residential use. Design advancements reduce efficiency losses caused by internal pump leakage and abrasives (sand). The high capacity FPS 4400 is unconditionally guaranteed against sand locking for one full year.

Standard 4" inch 1M3/H - 18 LPM bore pump

The standard FPS 4400 submersible pump features unique hydraulics that improves efficiency and minimise wear even when pumping abrasives (sand). All FPS44oo pumps are unconditionally guaranteed against sand locking in abrasive well conditions for one full year. Discharge and motor brackets are available in thermoplastic or stainless steel

Models available are:

• FPS1A-13 which is a 0.37kw / 0.5Hp wet end
• FPS1A-19 which is a 0.55kw / 0.75Hp wet end
• FPS1A-25 which is a 0.75kw / 1Hp wet end
• FPS1A-39 which is a 1.1Kw / 1.5Hp wet end

Models available are:

• FPS1B-09 which is a 0.37kw / 0.5Hp wet end
• FPS1B-14 which is a 0.55kw / 0.75Hp wet end
• FPS1B-19 which is a 0.75kw / 1Hp wet end
• FPS1B-27 which is a 1.1Kw / 1.5Hp wet end

Models available are:

• FPS2A-08 which is a 0.37kw / 0.5Hp wet end
• FPS2A-12 which is a 0.55kw / 0.75Hp wet end
• FPS2A-16 which is a 0.75kw / 1Hp wet end
• FPS2A-24 which is a 1.1Kw / 1.5Hp wet end
• FPS2A-32 which is a 1.5kw / 2Hp wet end

Models available are:

• FPS3A-09 which is a 0.55kw / 0.75Hp wet end
• FPS3A-12 which is a 0.75kw / 1Hp wet end
• FPS3A-19 which is a 1.1Kw / 1.5Hp wet end
• FPS3A-24 which is a 1.5kw / 2Hp wet end
• FPS3A-39 which is a 2.2kw / 3Hp wet end

Models available are:

• FPS4A-06 which is a 0.75kw / 1Hp wet end
• FPS4A-09 which is a 1.1Kw / 1.5Hp wet end
• FPS4A-14 which is a 1.5kw / 2Hp wet end
• FPS4A-27 which is a 2.2kw / 3Hp wet end

Models available are:

• FPS6A-05 which is a 0.55kw / 0.75Hp wet end
• FPS6A-08 which is a 0.75kw / 1Hp wet end
• FPS6A-10 which is a 1.1Kw / 1.5Hp wet end
• FPS6A-14 which is a 1.5kw / 2Hp wet end
• FPS6A-22 which is a 2.2kw / 3Hp wet end

Models available are:

• FPS9A-07 which is a 1.1Kw / 1.5Hp wet end
• FPS9A-09 which is a 1.5kw / 2Hp wet end
• FPS9A-14 which is a 2.2kw / 3Hp wet end
• FPS9A-26 which is a 3.7kw / 5Hp wet end

Models available are:

• FPS12A-06 which is a 1.5kw / 2Hp wet end
• FPS12A-09 which is a 2.2kw / 3Hp wet end
• FPS12A-17 which is a 3.7kw / 5Hp wet end
• FPS12A-26 which is a 5.5kw / 7.5Hp wet end

Models available are:

• FPS16A-05 which is a 1.1kw / 1.5Hp wet end
• FPS16A-07 which is a 1.5kw / 2Hp wet end
• FPS16A-11 which is a 2.2kw / 3Hp wet end
• FPS16A-19 which is a 3.7kw / 5Hp wet end