Franklin Motors FPS CS Series 5" Bottom Intake Stainless Steel Submersible Pumps
The 5" CS bottom intake pump and motor assembly has an all stainless steel construction and is supplied with a 20 meter lead with 3 pin plug and a float level control. Both lead assemblies are plug in type to allow for easy replacement. This pump features the new TRI-SEAL floating stage system. This new stage system improves efficiency and protects against wear when pumping abrasives (sand). All CS Series pumps are unconditionally guaranteed against sand locking in abrasive well conditions for one full year.
Applications:
- Septic Effluent Pumping
- Domestic Water Supply
- Pressure Boosting
- Water Distribution
- Fountains
- Irrigation
Features:
All Stainless Construction:
All CS components in contact with the pumped fluid, including hydraulics are made from 304 stainless steel to provide superior efficiency and performance over a wide variety of applications.
Compact close-coupled design:
Suitable for most common water well applications, the CS may also be operated in fountains, cisterns or watercourses, either vertically or horizontally.
Easy Installation:
The single phase version is equipped with internal capacitor and thermal motor protection, eliminating the need for a separate control panel.
Easy Plug-in type wiring connections:
Both the power cord and the float switch can be easily replaced in case of damage.
Sealed Motor
The long-life motor is completely sealed in a water-tight stainless enclosure and is cooled by the pumped fluid.
Double mechanical seal
The internal motor electrical components are further protected by two mechanical seals lubricated by an oil chamber (FDA compliant) that prevents wear and damage from running dry.
Heavy duty motor shaft:
An oversized motor shaft extends through pump and is designed to maintain alignment while handling mechanical stresses as it provides smooth transfer of power to the stages.
| Specifications |
|
|
| Flow Capacities |
Up to 7.5 m3/h |
 |
| Heads |
Up to 8 bar (80 meters) |
| Motor Ratings |
0.55kW to 1.1kW |
| Discharge |
1.25 inches BSPP |
| Winding Insulation |
Class F, IP68 protection |
| Duty Rating |
Continuous either vertical or horizontal up to 40°C |
| Maximum working pressure |
10 Bar |
| Maximum starts perhour |
20 |
 |
| |
|
|
 |
| |
|
|
|
